Justrite Replacement 1/8 OD Tube Fittings With PCTFE Ferrules For HPLC, Stainless Steel Manifold, Set Of 4, 28175

They include ferrules for a compression fit to the waste line.| Justrite OD Hard-Wall Tubing Compression Fittings with Ferrules for HPLC Poly Manifold, Package of 6, Green, 1/8", Plastic, 28189 The compression fittings, sold in sets of six, accommodate hard-wall tubing size of 1/8-inch OD.

The fittings are approximately 1" (25-mm) long and made of ETFE (ethylene tetrafluoroethylene) - a fluorine based plastic. They include ferrules for a compression fit to the waste line..

Justrite Puncture Pin Replacement Sleeve 5017 for Aerosolv® Aerosol Can Recycling System, 28182.| Justrite Puncture Pin Replacement Sleeve 5017 for Aerosolv® Aerosol Can Recycling System, 28182 The sleeve allows for smooth passing of puncture pin to prevent breaking.

Justrite Poly Sleeve Replacement 5018 for Aerosolv® Aerosol Can Disposal System, 28181.

| Justrite HPLC Poly Manifold with Stainless Steel Stacker Connector for Up to 12 Waste Lines, Silver/White, 28180 Multiple manifolds may be used on a custom designed Quick-Disconnect container as long as one disconnect remains unused to permit venting and prevent back pressure. Justrite HPLC Poly Manifold with Stainless Steel Stacker Connector for Up to 12 Waste Lines, Silver/White, 28180.

Safety container with manifold installed is US OSHA compliant and meets NFPA Code 30. | Justrite HPLC Poly Manifold with Polypropylene Quick Disconnect for Safety Disposal Can, Gray/White, Stainless Steel/Polypropylene, 28178. The HPLC (PTFE) Manifold is a cost effective way to enable up to six waste lines (per manifold) from HPLC processes to be fed into a single intake fitting.

Justrite HPLC Poly Manifold with Stainless Steel Quick Disconnect for Safety Disposal Can, Silver/White, Stainless Steel/Polypropylene, 28177 Use on round containers; not for use on oval style can. 316 stainless steel or polypropylene, or a No. Safety container with manifold installed is US OSHA compliant and meets NFPA Code 30.

HPLC Stainless Steel Manifold fittings, four each: 1/8" (3-mm) OD tube fittings with corresponding PCTFE ferrules for compression fit of waste line. | Justrite Replacement 1/8" OD Tube Fittings with PCTFE Ferrules for HPLC, Stainless Steel Manifold, Set of 4, 28175.

The six ports are tapped to accommodate the 1/4-28 threads of the separately available compression fittings.

HPLC Stainless Steel Manifold fittings, four each: 1/8" (3-mm) OD tube fittings with corresponding PCTFE ferrules for compression fit of waste line.