Justrite Stainless Steel Horizontal Drum Vent For Corrosives And Solvents, 2 Bung, Stainless Steel/Brass/Polyethylene, 08306

All safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55kPa) and include a flame arrester to absorb and safely dissipate heat. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. Model no. Remove cap during drum filling operations. Vacuum relief is automatic on vertically-installed vents and manual on horizontally-installed vents. Valve within the vent is tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds for vacuum relief during drum dispensing operations. Vacuum relief permits smooth liquid flow and prevents possible drum collapse and leakage. Safety fill vents and funnels fit the 2-in (51-mm) bung on a vertically-stored drum. , Justrite Stainless Steel Horizontal Drum Vent for Corrosives and Solvents, 2" Bung, Stainless Steel/Brass/Polyethylene, 08306 Six-inch (152-mm) flame arrester safely dissipates heat and prevents flashback from external ignition sources. Provide emergency pressure venting in the event of a fire to avoid drum failure and catastrophic consequences. The brass vent provides automatic pressure and vacuum relief, and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. 08211 includes a 9-in(229-mm) wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage.

Secondary Containment > Drum Pumps & Funnels & Vents & Faucets > Safety Drum Vents

Justrite Stainless Steel Horizontal Drum Vent For Corrosives And Solvents, 2 Bung, Stainless Steel/Brass/Polyethylene, 08306